Gamasutra: The Art & Business of Making Gamesspacer
View All     RSS
November 14, 2018
arrowPress Releases
  • Editor-In-Chief:
    Kris Graft
  • Editor:
    Alex Wawro
  • Contributors:
    Chris Kerr
    Alissa McAloon
    Emma Kidwell
    Bryant Francis
    Katherine Cross
  • Advertising:
    Libby Kruse






If you enjoy reading this site, you might also want to check out these UBM Tech sites:


 

Graveyard Keeper: How the graphics effects are made

by Svyatoslav Cherkasov on 10/23/18 09:52:00 am   Featured Blogs

The following blog post, unless otherwise noted, was written by a member of Gamasutra’s community.
The thoughts and opinions expressed are those of the writer and not Gamasutra or its parent company.

 

Hello! I’m a lead programmer of the game “Graveyard Keeper”. I'd like to share with you some techniques and tricks that we used to make our game look as you see it from the GIF below.

We are very passionate about graphics in our games. That’s why we put so much time and effort into different effects and other stuff that makes our pixel art as attractive as possible. Maybe you will find here something helpful for your work.

First I want to say some words about big parts that compose the visual part of our game:

  • Dynamic ambient light is just change of illumination depending on the time of the day.
  • LUT color-correction is responsible for the change of color shades depending (again) on the time of the day (or world zone).
  • Dynamic light sources — torches, ovens, lamps.
  • Normal maps — make objects look like they have a real volume, especially when light sources move.
  • The math of light 3D distribution — a light source centered on the screen should illuminate a higher object properly and should not illuminate an object below (turned to the camera with its dark side).
  • Shadows are made with sprites, they turn and react to light source positions.
  • Object altitude simulation — for the fog to be displayed correctly.
  • Other stuff: rain, wind, animations (including shader animation of leaves and grass) and so on.

Let’s talk about those in more details now.

Dynamic ambient light

Nothing special here. Darker at night, lighter in the daytime. The light’s color set with a gradient. By nightfall a light source not only becomes darker but gets blue tint.

It looks like this:

LUT color correction


LUT (Look-up table) is a table of color change. Roughly speaking it’s a three-dimensional  RGB array where each element (a) corresponds to a color with its coordinates as RGB values; (b) contains the color value that the color associated with the element should be changed to. So if there is a red point at coordinates  (1, 1, 1), it means that all the white color from the picture will be replaced with red. But if there is white color at the same coordinates (R=1, G=1, B=1), the change doesn’t happen. So LUT by default has coordinates associated with a particular color. I mean that point with coordinates (0.4, 0.5, 0.8) is associated with color (R=0.4, G=0.5, B=0.8).

It should also be pointed here that for convenience that 3D texture is represented as two-dimensional. That’s how for example default LUT (that doesn’t change color) looks:

Easy to make. Easy to use. Works really fast.

It is very easy to set up -- you give an artist a picture from your game and say: “Make it look like it’s evening”. Then you apply all color layers plus the default LUT. Congratulations! You get an Evening LUT.

Our artist was actually very passionate about it. He created 10 different LUTs for different time of day (night, twilight, evening and so on…) That’s how the final set of LUTs looks:

As a result one location may look different at different time of day:

The picture also shows how the intensity of the light sprites changes depending on the time of day.

Dynamic light sources and normal maps

We use regular light sources, the default Unity ones. Also, every sprite has its own normal map. This helps to feel the volume.

These normals are pretty easy to draw. An artist roughly paints light on 4 sides with a brush:

And then we merge them with a script in a normal map:

If you are looking for a shader (or software) that can do that, pay attention to Sprite Lamp.

3D light simulation

This is where things start to be a bit more complicated. You can’t just light the sprites. It’s very important whether a sprite is “behind” a light source or “in front of” it.

Take a look at this picture.

These two trees are at the same distance from the light source but the back one is illuminated while the front one is not (because the camera faces its dark side).

I solved this problem very easily. There is a shader that calculates the distance between a light source and a sprite on the vertical axis. If it’s positive (the light source is in front of the sprite), we illuminate the sprite like we always do, but if it’s negative (the sprite is blocking the light source), then the intensity of lighting is fading depending on the distance at a very quick rate. There is a rate, not just “not to illuminate”. So if the light source behind the sprite is moving, the sprite is blackening gradually, not at once. Yet it’s still very fast.

Shadows

Shadows are made with sprites rotating around a point. I tried to add a skew there, but it turned out to be unnecessary.

Every object may have a maximum of 4 shadows. The shade from the sun and the additional three from dynamic light sources. So the image below shows this concept:

The problem “how to find the closest 3 light sources and to calculate the distance and an angle was solved with a script running in the Update() loop.

Yes, it’s not the quickest way considering how much math is involved. If I programmed it today, I would use that modern Unity Jobs System. But when I did it there was no such thing so I had to optimize regular scripts we had.

The most important thing here is that I did the sprite rotation not modifying the transform but inside a vertex shader. So the rotation isn’t involved here. You just put a parameter to a sprite (I used the color channel for that, all the shadows are black anyway), while the shader is responsible for sprite rotations. It turns out to be quicker -- you don’t have to use Unity geometry.

There is a minus to this approach. The shadows are to be adjusted (and sometimes drawn) separately for each object. Yet actually, we used about ten different more or less universal sprites (thin, thick, oval etc.)

The next disadvantage is that it’s difficult to make a shadow for an object that is stretched along one axis. For instance, look at the fence shadow:

Not ideal. That’s how it looks if you make a fence sprite translucent:

It should be noted here, by the way, that the sprite is highly distorted vertically (the shadow sprite original looks like a circle). That’s why its rotation looks like not just a simple rotation but also like a distortion.

The fog and the altitude simulation


There is also fog in the game. It looks like this (the regular version above and and an extreme 100% fog to demonstrate the effect).

As you see, the tops of houses and trees are seen from the fog. In fact, this effect is really easy to make. The fog consists of a great deal of horizontal clouds spread across all the picture. As a result the upper part of all the sprites is covered with a fewer amount of fog sprites:

The wind

The wind in a pixel art game is a completely different story. There are not many options here. To animate manually (it’s not possible considering how much art we have) or to make a deforming shader, but then you’ll have to deal with some ugly distortions. You can also don’t do any animation, but then the picture will look static and lifeless.

We chose the deforming shader. It looks like that:

It’s pretty obvious what’s happening here if we apply the shader to the chequered texture:

It should also be pointed here that we do not animate the whole crown of a tree but some particular leaves:

There are also an animation of a wheat field shake and things are pretty simple here too. The vertex shader changes the shape of the x-coordinates taking y-coordinate into account. The highest point will be shaken the most intensely. The intention here is that the top should move while the root shouldn’t. Plus the phase of shaking varies according to the x/y coordinates to make different sprites move separately.

This shader is also used to create a swinging effect when a player goes through wheat or grass.

I think that’s all for now. I haven’t spoken about scene construction and about its geometry, because there is a lot to speak about in a new entry. Beyond that I’ve spoken about all the main solutions that we applied developing our game.


Related Jobs

Zapdot
Zapdot — Cambridge, Massachusetts, United States
[11.13.18]

Software Engineer
Zapdot
Zapdot — Cambridge, Massachusetts, United States
[11.13.18]

Senior Software Engineer
Monster Squad
Monster Squad — Seattle, Washington, United States
[11.13.18]

UE4 GAMEPLAY PROGRAMMER
Sixteen Tons Entertainment GmbH
Sixteen Tons Entertainment GmbH — Tuebingen, Germany
[11.13.18]

Unreal Engine Developer / C++





Loading Comments

loader image